Composites

Carbon

Carbon Fiber

Description

High-strength, low-density continuous carbon fiber tow with exceptional tensile strength (~3.5–7 GPa) and stiffness, widely used in aerospace, automotive, and structural composite applications.

Carbon Chopped Fiber

Description

Short-cut carbon fiber strands (3–24 mm) for reinforcing injection-molded thermoplastics, resins, and cement, delivering high stiffness and strength-to-weight improvements in molded parts such as automotive brake components and electronics housings.

Carbon Fabric

Description

Woven carbon fiber reinforcement fabric (plain, twill, or satin weave) offering high in-plane strength, suitable for hand layup, infusion, and prepreg manufacturing of aerospace panels, automotive body parts, and sporting goods.

Carbon Fiber Tapes

Description

Narrow unidirectional or woven carbon fiber tape used for targeted structural reinforcement in composite laminates, providing localized high-strength reinforcement along a specific load direction.

Carbon Tubes

Description

Pultruded or roll-wrapped hollow carbon fiber tubes offering high specific stiffness and strength, used in aerospace frames, robotic arms, UAV structures, and lightweight engineering applications.

Carbon Sleeves

Description

Braided tubular carbon fiber sleeve that expands and contracts to conform around mandrels or profiles, enabling seamless, joint-free composite tube fabrication with epoxy or vinyl ester resins.

Carbon Paper / Cloth

Description

Thin, conductive carbon paper or woven cloth used in fuel cell gas diffusion layers, electrochemical electrodes, and electrical shielding applications, combining electrical conductivity with flexibility.

Carbon Powder

Description

Fine carbon black or graphite powder used as a conductive filler in polymers, lubricants, and electrodes, enhancing electrical conductivity, tribological performance, and thermal management in composite materials.

Basalt

Basalt Fiber

Description

Continuous basalt filament fiber (10–20 µm diameter) derived from volcanic rock, offering tensile strength three times that of steel, excellent temperature resistance up to 700°C, and superior alkali corrosion resistance compared to E-glass.

Basalt Chopped Fiber

Description

Short-cut basalt fiber strands (typically 3–50 mm) blended into concrete, asphalt, and thermoplastic matrices to reduce cracking, enhance flexural strength, and improve impact resistance in construction and automotive applications.

Basalt Fabric

Description

Woven basalt fiber fabric with excellent mechanical properties and resistance to temperatures up to 800°C, used for fire protection blankets, structural composite reinforcement, and thermal shielding in marine and aerospace industries.

Basalt Tape

Description

Basalt fiber woven tape resistant to continuous temperatures up to 700°C (instantaneous 1095°C), used for thermal wrapping of pipes, cables, and exhaust systems, and as localized structural reinforcement in composite structures.

Basalt Bars

Description

Pultruded basalt fiber rebar or structural bars offering a lightweight (70% lighter than steel), corrosion-resistant alternative to steel rebar for reinforcing concrete bridges, buildings, and marine structures.

High Silica

Silica Blanket

Description

Needled or woven silica fiber blanket with ≥96% SiO₂ content, providing continuous insulation performance up to 1100°C with minimal shrinkage, used in furnace linings, fire blankets, and aerospace thermal protection.

Silica Fiber

Description

High-purity amorphous silica continuous filament fiber (SiO₂ ≥96%) rated for 1000°C continuous operation, offering excellent electrical insulation and chemical resistance for industrial and fire safety textile applications.

Silica Yarn

Description

Silica fiber yarn (200–1800 tex) for weaving high-temperature ropes, sealing tapes, and insulation textiles, rated for 1000°C continuous service with low thermal conductivity and excellent acid resistance.

Silica Fabric

Description

Woven silica fiber cloth (SiO₂ ~70%) rated for 800–1000°C, used in fire curtains, welding blankets, heat shields, and gaskets where moderate-to-high temperature resistance and electrical insulation are required.

High Silica Fabric

Description

High-purity woven silica fabric (SiO₂ ≥96%) with continuous rating to 1000°C and short-term capability to 1650°C, used for welding protection, furnace curtains, fire blankets, and molten metal splash guards.

Silica Mesh

Description

Open-weave silica mesh fabric rated to 1000°C, combining thermal insulation with airflow permeability, suitable for reinforcing refractory coatings, high-temperature filtration, and composite thermal barrier systems.

Quartz

Quartz Fiber

Description

High-purity fused quartz continuous fiber (SiO₂ ≥99.9%) with tensile strength of ~7 GPa and temperature resistance to 1050°C, used in aerospace radomes, antenna windows, thermal protection systems, and high-frequency electronic composites.

Quartz Fabric

Description

Woven quartz fiber fabric with SiO₂ purity ≥99.9%, offering low dielectric loss, high thermal resistance up to 1200°C, and excellent mechanical strength for radomes, aerospace TPS panels, and microwave-transparent composites.

Quartz Wool

Description

Bulk quartz wool or felt offering outstanding thermal insulation up to 1050°C, non-flammable and incombustible, used for high-temperature filtration, combustion reactor insulation, and compounding applications.

Quartz Tape

Description

Quartz fiber tape woven from ≥99.9% SiO₂ yarns, withstanding temperatures up to 1050°C, used for high-temperature wrapping, insulation of aerospace and electrical components, and reinforcement of composites in extreme environments.

Quartz Clothes

Description

Flexible woven quartz fiber cloth garments or wraps offering thermal protection up to 1050°C, used in aerospace thermal shielding, semiconductor processing, and protective covers for sensitive high-temperature instrumentation

Quartz Sleeves

Description

Tubular braided quartz fiber sleeve rated to 1050°C, used for protecting cables, sensors, and structural profiles in high-temperature aerospace, defense, and industrial furnace environments.

Quartz Plates

Description

Precision flat quartz fiber plates with low coefficient of thermal expansion and high purity (SiO₂ ≥99.9%), used in semiconductor substrate processing, high-temperature sinter plates, and laboratory furnace components.

Quartz Tubes

Description

High-purity fused quartz tubes (SiO₂ ≥99.9%) with excellent thermal shock resistance and transparency to UV light, used in semiconductor diffusion furnaces, fiber optic preform processing, and UV lamp enclosures.

Glass

Glass Fiber

Description

E-glass continuous filament fiber with good tensile strength (~3.5 GPa), low dielectric constant, and excellent electrical insulation, widely used as the primary reinforcement in FRP composites for marine, construction, and industrial applications.

Glass Chopped Fiber

Description

Short-cut E-glass chopped strands (3–25 mm) for reinforcing thermosetting and thermoplastic resins via spray-up, SMC, or injection molding, adding tensile strength and stiffness to automotive, marine, and consumer composite parts.

Glass Fabric

Description

Woven E-glass reinforcement fabric in plain or twill weave, providing balanced in-plane mechanical properties for hand layup, resin infusion, and autoclave composite manufacturing in construction, marine, and industrial sectors.

Glass Fiber Tapes

Description

Narrow woven or unidirectional E-glass tape for targeted local reinforcement of composite structures, pipe wrapping, cable insulation, and sealing applications requiring good dielectric properties and moisture resistance.

S Glass Fiber

Description

High-performance S-glass (magnesia-alumina-silicate) continuous fiber with ~40% higher tensile strength than E-glass (~4.6 GPa) and superior fatigue resistance, used in aerospace structures, ballistic armor, and pressure vessels.

S Glass Fabric

Description

Woven S-glass reinforcement fabric offering higher strength and impact resistance than E-glass at similar weight, used in aerospace panels, helicopter rotor blades, and high-performance marine and sporting goods composites.

Hollow Glass Fiber & Fabrics

Description

Hollow-core E-glass fiber and fabrics providing lower density, better acoustic damping, and improved thermal insulation compared to solid glass fiber, used in lightweight sandwich panels and specialized acoustic composites.

Aramid

Aramid Fiber

Description

High-tenacity para-aramid continuous filament fiber (e.g., Kevlar®/Twaron®) with tensile strength of ~3.6 GPa and five times the strength-to-weight ratio of steel, used in ballistic armor, aerospace composites, ropes, and pressure vessels.

Aramid Fabric

Description

Woven para-aramid ballistic fabric with high in-plane tensile and tear strength, used in body armor vests, helmets, blast-resistant panels, parachutes, and cut/stab-resistant protective clothing.

Aramid Chopped Fiber

Description

Short-cut aramid fiber strands (0.25–12 mm) used to reinforce brake pads, clutch linings, and rubber compounds as an asbestos-free friction material, and to strengthen engineering thermoplastics via injection molding.

Aramid Pulp / Powder

Description

Highly fibrillated aramid pulp or fine powder with very high surface area (8–10 m²/g) used as a reinforcing agent in friction materials (brake pads, gaskets), specialty papers, sealants, and coatings for improved thermal stability and strength.

Electrical Product Piezometer

d33 Piezometer System

PM100

Description

Piezotest PM100 benchtop d33 piezometer system measuring the piezoelectric charge coefficient in two ranges (1–100 pC/N and 10–1000 pC/N) at 0.1 pC/N resolution, suitable for ceramics, PVDF polymers, and composite piezo materials.

PM200

Description

Piezotest PM200 advanced d33 piezometer with 0.01 pC/N maximum resolution, variable test force and frequency, and options to measure g33, d31, d15, capacitance (C), and dielectric loss (tan δ) for research-grade piezoelectric characterization.

PM300

Description

Piezotest PM300 PC-integrated d33 piezometer system offering the highest resolution (0.01 pC/N), full multi-parameter measurement (d33, g33, d31, g31, d15, g15, C, εT33, tan δ), and software-driven data acquisition for production QC and R&D.

Piezo-Electric Material / Electroactive Polymer

P(VDF-TrFE) copolymers

Description

P(VDF-TrFE) ferroelectric copolymer with strong piezoelectric and pyroelectric activity, processed as films or coatings for flexible sensors, actuators, energy harvesters, and wearable electronic devices.

Polling Unit with High Voltage Power Supply

Polling Unit with High Voltage Power Supply

Description

High-voltage DC poling unit for electrically aligning dipoles in piezoelectric polymers (PVDF, P(VDF-TrFE)) and ceramics, enabling controlled polarization at field strengths up to several MV/m for maximizing piezoelectric response.

High Quality Diodes

Bridge

Description

High-voltage diode bridge rectifier assemblies for converting AC to DC in power supply circuits, capable of operating at elevated voltages and temperatures for industrial and piezoelectric poling power supply applications.

Rectifiers

Description

High-voltage silicon rectifier diodes providing reliable unidirectional current flow in power conditioning circuits, used in high-voltage power supplies, multiplier stacks, and industrial rectification systems.

HV Assemblies

Description

High-voltage diode assemblies and multiplier stacks configured for kilovolt-range DC output, used in piezoelectric poling units, X-ray generators, electrostatic precipitators, and high-energy capacitor charging circuits.

Special Devices

Description

Custom high-voltage diode devices including transient voltage suppressors, avalanche diodes, and specialized rectifier configurations for demanding high-voltage industrial and research applications.

Ceramic

High Quality Ceramic Capacitors

MLCC capacitors

Description

Multi-layer ceramic chip capacitors (MLCCs) offering high volumetric capacitance, low ESR, and stability over a broad temperature and frequency range, used in power electronics, filtering, and decoupling applications.

SLC capacitors

Description

Single-layer ceramic (SLC) capacitors with high voltage handling capability and low dielectric loss, used in RF power amplifiers, high-frequency resonant circuits, and power conditioning for telecommunications and radar systems.

Thick Film Circuits

Description

Thick-film hybrid circuit substrates with screen-printed resistor and conductor layers on ceramic, providing compact, high-reliability passive network integration for aerospace, defense, and industrial electronic assemblies.

Ceramic & Metal Crucibles

Alumina

Description

High-purity alumina (Al₂O₃) crucibles with excellent chemical inertness, thermal stability up to 1800°C, and resistance to molten metals and slags, used for melting, sintering, and calcining in laboratories and metallurgical processes.

Zirconia

Description

Dense zirconia (ZrO₂) crucibles with very low thermal conductivity and excellent resistance to reactive metals and corrosive slags at temperatures exceeding 2000°C, used for melting platinum group metals and specialty alloys.

Pyrolytic Boron Nitride

Description

Pyrolytic boron nitride (PBN) crucibles with extreme purity, non-wetting surface, and high-temperature stability up to 1800°C in inert atmosphere, used for crystal growth (MBE), III-V semiconductor processing, and ultra-clean metal melting.

Magnet

Permanent Magnet

Sintered NdFeB Magnets

Description

Sintered neodymium-iron-boron (NdFeB) permanent magnets with the highest energy product of any permanent magnet (up to 55 MGOe), used in electric motors, wind turbines, MRI machines, speakers, and precision actuators.

Bonded NdFeB Magnets (Compression Molded)

Description

Compression-molded bonded NdFeB magnets offering complex net-shape geometries, lower energy product than sintered grades but tighter dimensional tolerances, used in brushless DC motors, sensors, and compact actuator assemblies.

AlNiCo Magnets

Description

Aluminum-nickel-cobalt (AlNiCo) permanent magnets with excellent temperature stability (up to 550°C), high remanence, and superior corrosion resistance, used in sensors, guitar pickups, relays, and high-temperature holding applications.

Samarium Cobalt Magnets

Description

Samarium-cobalt (SmCo) permanent magnets with high energy product (up to 32 MGOe) and outstanding thermal stability up to 350°C, used in aerospace actuators, military motors, and applications requiring performance at elevated temperatures.

Ferrite & Magnetic Assemblies

Description

Ceramic ferrite magnets and precision magnetic assemblies combining cost-effective permanent magnets with steel or aluminum structures for motor, holding, and sensor applications requiring moderate field strength and excellent corrosion resistance.

Special Metals (No Ferrous Metals)

Titanium Products

Titanium Sheets

Description

Commercially pure (CP) or Ti-6Al-4V titanium alloy sheets offering an outstanding strength-to-weight ratio (~880 MPa tensile), biocompatibility, and excellent corrosion resistance, used in aerospace skins, marine, and medical implant applications.

Titanium Fasteners

Description

Titanium alloy bolts, screws, and threaded fasteners (typically Ti-6Al-4V) with ~60% lower density than steel at comparable strength, offering corrosion resistance and biocompatibility for aerospace, motorsport, and medical device assembly.

Titanium Rods

Description

Solid titanium alloy cylindrical rods (CP or Ti-6Al-4V) used as stock material for CNC machining of aerospace components, medical implants, and industrial parts requiring high strength, low weight, and corrosion resistance.

Titanium Nuts

Description

Titanium alloy hex nuts for high-strength, lightweight fastening in aerospace structures, marine hardware, and medical devices, offering corrosion resistance and compatibility with titanium or stainless steel fasteners.

Titanium Shim Foil

Description

Ultra-thin titanium shim foil (typically 0.025–0.5 mm thick) used for precision gap filling, shimming, and sealing in aerospace assemblies, turbine components, and high-temperature environments requiring exact dimensional control.

Molybdenum Products

Molybdenum Sheets

Description

Molybdenum alloy sheets (99.95% purity) with a melting point of 2623°C, low thermal expansion, and high thermal conductivity, used as heat spreaders, furnace components, and sputtering targets in semiconductor and high-temperature processing.

Molybdenum Rods

Description

Molybdenum cylindrical rods used as mandrels, heating elements, and structural components in high-temperature vacuum furnaces, glass melting equipment, and ion implantation systems for semiconductors.

Molybdenum Wires

Description

Fine-diameter molybdenum wire (0.01–2 mm) with very high tensile strength and temperature resistance, used as incandescent lamp mandrel wire, EDM wire, thermocouple supports, and heating elements in high-temperature furnaces.

Tantalum Products

Tantalum Foils

Description

Tantalum foil with excellent ductility, biocompatibility, and outstanding resistance to acids (except HF and fuming H₂SO₄), used for corrosion-resistant liners, capacitor anode foils, and chemical processing equipment.

Tantalum Plates

Description

Tantalum alloy plates (99.95% purity) used for fabricating corrosion-resistant chemical reactor linings, heat exchangers, and surgical implant components requiring excellent resistance to body fluids and mineral acids.

Tantalum Bar

Description

Solid tantalum bars used as feedstock for machining corrosion-resistant chemical processing components, X-ray shielding, and specialty capacitor anodes in electronic components.

Tantalum Rod

Description

Tantalum cylindrical rods for precision machining of chemical industry valves, fittings, and laboratory vessels that must withstand concentrated acids, high temperatures, and oxidizing environments.

Tantalum Crucibles

Description

High-purity tantalum crucibles with excellent chemical inertness and refractoriness (melting point 3017°C), used for melting corrosive metals and glasses, crystal growth, and laboratory high-temperature reactions.

Copper & Beryllium Products

Beryllium Copper Round Bar

Description

Beryllium copper (BeCu C17200) round bar with very high tensile strength (up to 1400 MPa after aging), excellent electrical conductivity, and good corrosion resistance, used for EDM electrodes, springs, connectors, and precision molds.

Copper Fasteners

Description

Copper alloy fasteners (bolts, nuts, screws) offering excellent electrical conductivity, corrosion resistance, and non-sparking properties, used in marine, electrical, and hazardous-area applications requiring non-magnetic, conductive hardware.

Copper Pipes

Description

Seamless or welded copper pipes with outstanding thermal and electrical conductivity, used in heat exchangers, refrigeration systems, plumbing, and power distribution bus bars requiring efficient heat or current transfer.

Beryllium Copper Sheets

Description

Beryllium copper (BeCu) thin sheets providing a combination of high strength, spring properties, and electrical conductivity for stamped contact springs, shielding cans, and precision electronic components.

Copper Sheets

Description

Electrolytic tough-pitch (ETP) or oxygen-free (OFC) copper sheets with >99.9% purity, used for bus bars, heat sinks, EMI shielding, and decorative architectural applications requiring high conductivity.

Beryllium Copper Foils

Description

Beryllium copper thin foils (0.05–0.5 mm) for precision spring contacts, RF gaskets, and EMI shielding applications requiring high elastic modulus, fatigue resistance, and good electrical conductivity in a thin, formable format.

Beryllium Copper Plates

Description

High-strength beryllium copper plates (C17200/C17300) heat-treated to peak hardness (~40 HRC), used as plastic injection mold inserts, core pins, and tooling components requiring rapid heat dissipation and high wear resistance.

Nickel Alloy Products

Nickle Pipes

Description

Nickel and nickel-alloy (Inconel, Hastelloy, Monel) seamless or welded pipes for chemical processing, marine heat exchangers, and high-temperature piping systems requiring corrosion resistance to acids, alkalis, and seawater.

Nickle Sheets

Description

Nickel alloy flat-rolled sheets (pure Ni 200/201, Monel, Inconel) with outstanding corrosion resistance in reducing and oxidizing environments, used for chemical plant linings, electroplating anodes, and high-temperature structural applications.

Nickle Rods

Description

Nickel alloy solid rods used as stock material for CNC machining of corrosion-resistant valves, fittings, and pump components in chemical, offshore, and power generation industries.

Bronze Products

Bronze Sheets

Description

Tin bronze or aluminum bronze flat sheets with good strength, corrosion resistance to seawater, and excellent wear resistance, used for marine hardware, bushings, bearing plates, and decorative architectural cladding.

Bronze Bar

Description

Bronze solid bars used as feedstock for machining bushings, bearings, valve bodies, and wear pads in marine, industrial, and hydraulic applications where corrosion resistance and self-lubricating properties are advantageous.

Bronze Rod

Description

Bronze cylindrical rods for machining small-to-medium corrosion-resistant mechanical components such as worm gear wheels, bearing sleeves, and valve seats in pumps and hydraulic systems.

Phosphor Bronze Strips

Description

Cold-rolled phosphor bronze strips (CuSn8P) with excellent spring properties, fatigue resistance, and electrical conductivity, used for contact springs, relay blades, electrical connectors, and precision shim stock.

Inconel Metal Products

Inconel Cap

Description

Inconel alloy end caps or fitting caps with exceptional oxidation and corrosion resistance at temperatures up to 1100°C, used to seal tube ends in high-temperature furnace assemblies and chemical processing systems.

Inconel Pipes

Description

Inconel seamless pipes (alloy 625/718) with outstanding resistance to pitting, crevice corrosion, and high-temperature oxidation, used in jet engine exhaust systems, chemical reactors, and offshore oil and gas piping.

Inconel Sheets

Description

Inconel flat-rolled sheets offering high strength retention above 700°C, used in aerospace combustion liners, heat shields, nuclear reactor components, and chemical plant vessels handling corrosive media at elevated temperatures.

Inconel Plates

Description

Inconel alloy plates (typically Inconel 625 or 718) providing superior strength and corrosion resistance for fabricating pressure vessel flanges, heat exchanger baffles, and aerospace structural panels.

Inconel Rods

Description

Inconel solid cylindrical rods used for CNC machining of high-temperature turbine components, exhaust valve seats, and corrosion-resistant fasteners for aerospace, defense, and energy applications.

Inconel Wires

Description

Inconel alloy wire with high tensile strength and oxidation resistance up to 1200°C, used for high-temperature springs, thermocouple sheaths, mesh screens, and aerospace fastener winding.

Inconel Round Bars

Description

Inconel precision round bars with close dimensional tolerances used as feedstock for machining turbine discs, shaft components, and gas path hardware in jet engines and industrial gas turbines.

Hastelloy Metal Products

Hastelloy Wires

Description

Hastelloy alloy wire (C-276, C-22, or B-3) with outstanding resistance to both oxidizing and reducing chemical environments, used for winding heating elements, fabricating corrosion-resistant mesh, and spring components in chemical reactors.

Hastelloy Pipes

Description

Hastelloy seamless pipes with superior resistance to pitting, stress corrosion cracking, and chloride environments, used in chemical process piping for handling wet chlorine, sulfuric acid, and other highly aggressive media.

Hastelloy Plates

Description

Hastelloy flat-rolled plates providing excellent high-temperature strength and corrosion resistance in both oxidizing and reducing atmospheres, used for chemical reactor vessel construction, heat exchanger shells, and industrial scrubber components.

Hastelloy Rods

Description

Hastelloy solid rods used as feedstock for machining impellers, valve stems, pump shafts, and agitator components in chemical processing plants handling highly corrosive and oxidizing mineral acid environments.

Zirconium Products

Zirconium Foils

Description

Zirconium thin foils with excellent corrosion resistance to mineral acids and alkalis, very low thermal neutron absorption cross-section, and biocompatibility, used in nuclear fuel cladding, chemical processing, and medical implant applications.

Zirconium Bar

Description

Zirconium solid bars used as stock material for machining chemical plant fittings, reactor vessel internals, and nuclear fuel channel components requiring resistance to strong acids and aqueous corrosion.

Zirconium Rod

Description

Zirconium cylindrical rods offering exceptional corrosion resistance in aggressive chemical environments including HCl, H₂SO₄, and organic acids, used for fabricating chemical processing equipment, pump shafts, and nuclear reactor hardware.

Zirconium Plates

Description

Zirconium alloy plates with very low neutron absorption and outstanding resistance to water, steam, and dilute acids, used for nuclear reactor core structural components, chemical vessel liners, and laboratory ware in corrosive environments.

Niobium Products

Niobium Rod

Description

High-purity niobium solid rods (99.95% Nb) with a melting point of 2477°C, excellent superconducting properties at cryogenic temperatures (Tc ~9.2 K), and good corrosion resistance, used in superconducting accelerator cavities, MRI magnets, and niobium-based alloy production.

Niobium Pipe Elbow

Description

Niobium pipe elbows providing corrosion-resistant flow direction changes in chemical processing systems handling highly corrosive media such as concentrated HNO₃, and in superconducting liquid helium cryogenic piping systems.

Tungsten Products

Tungsten-Molybdenum Rods

Description

Tungsten-molybdenum alloy rods combining tungsten's very high melting point (3422°C) with molybdenum's lower density, providing outstanding stiffness, creep resistance, and thermal conductivity for heating elements, electrodes, and high-temperature structural components in vacuum furnaces.